Level Monitoring & Control LevelMaster™ CHS1000 Liquid Level Meter The EPG LevelMaster CHS1000 Liquid Level Meter, a component of the EPG LevelMaster Level Measuring System, is used to monitor levels and control equipment. LevelMaster™ Level Sensor The EPG LevelMaster Level Sensor, a component of the EPG LevelMaster Level Monitoring & Control System, is used to accurately measure liquid levels and transmit signal to the meter/display. EPG Bellows The EPG Bellows unit is designed to be used with EPG's submersible LevelMaster™ Level Sensor. It is made out of flexible rubber, mounted in a control panel or breakout box and has two major functions. LMSA Level Monitoring Stand Alone System The LevelMaster Stand Alone (LMSA) Level Monitoring System monitors and displays liquid levels in sideslope risers, wells, tanks, sumps, reservoirs, and settling ponds. WNSA 1000 Tank Gauging System The EPG WNSA 1000 Tank Gauging System simultaneously measures and displays liquid level (feet) and volume (gallons) in horizontal and vertical cylindrical tanks. F-Series High Level Sensor This "F" Series Sensor is a normally closed (N.C.) level displacement sensor (float) that moves up and down a guide rod actuating a magnetic reed switch. F-Series Level Sensors This "F" Series Sensor is a normally open (N.O.) level displacement sensor (float) that moves up and down a guide rod actuating a magnetic reed switch. EPG Tank Full Level Sensor EPG’s Tank Full Sensor is a level displacement sensor (float) that is used to monitor a tank liquid level. The sensor is normally closed (N.C.). EPG 3-Point Level Sensor EPG’s 3-Point Level Sensor has three "F" series level displacement sensors (floats) that move up and down on guide rods actuating magnetic reed switches. EPG SJ Sensor Float Switch The EPG SJ Sensor Float Switch is used to accurately indicate liquid levels and transmit signals to a controller. EPG Leak Detection Sensor EPG’s leak detectors are stainless steel electrodes commonly used to detect the presence of conductive fluids. EPG Conductivity Probes EPG’s Conductivity Probes are stainless steel electrodes that are commonly used to start and stop a pump. They are weighted, independently suspended and are mounted in small diameter PVC housings. EPG Interface Sensors Level displacement sensors suitable for both water and product thanks to a combination of level displacement sensor and conductivity probes. EPG Test Simulator EPG Companies Inc. Model 3748 Test Simulator is a dual function simulator that simulates both 2-wire transmitters and pulse output.