| EH 1500T Thermal Oxidizer |
Trailer mounted, 1500 SCFM max. capacity |
| Vapor Extraction Package |
Skid mounted, 100 CFM at 5.5 HG vacuum, with Roots 24 URAI blower, 3 HP, three phase, XP motor, CS-16b condensate separator with high level, and NEMA 3R controls mounted and wired to skid. |
| PVE-RT1, portable vapor extraction package |
1 HP, 115 V, XP |
| Air Sparge Package |
Portable, 15 CFM, 1 HP, 230 V, single phase, TEFC |
| Lamson Turbotron |
10 HP, three phase, XP (never run), Rotron 454, regenerative blower, 1.5 HP, 115/230 V, single phase, XP |
| Gast 2567, oilless rotary vane compressor |
1.5 HP, 115/230 V, single phase, XP |
| NY 2206A, centrifugal blower |
1000 CFM, 10 HP, three phase, XP |
| NY 1904A, centrifugal blower |
500 CFM, 5 HP, three phase, XP |
| NY 2004A, centrifugal blower |
300 CFM, 3 HP, single phase, TEFC |
| Gast R6P355A, regenerative blower |
200 CFM, 5.5 HP, three phase, TEFC |
| CS-16b, condensate filter separator |
With high level switch, and drain |
| CS-24a, condensate filter separator |
With high level switch, and drain |
| Disconnect Panel fused, to 15 HP, three phase, NEMA 3R |
|
| Magnetic Starter |
|
| Manual Starter |
|
| Start Winding Control |
For 1 HP sub. pump, NEMA 4, disconnect, & fuses |