Inquire About This Product

The EPG Flow Spool pieces are designed to help create a uniform flow profile to assure repeatability and accuracy. Available in sizes from 1" to 14" pipe. Flow spool should be sized to match pump performance.

Features:

• All welded construction
• Pressure tested
• Simplifies installation and alignment
• Assured accuracy
• Excellent repeatability

Accessories:

• Sample port with valve
• Liquid-filled pressure gauge with isolation valve
• Vacuum release anti-siphon valve

Discharge Options:

• Straight
• 90° left discharge, 90° right discharge
• 90° up discharge, 90° down discharge

Available Pipe:

• PVC SCH40, PVC SCH80
• 304 Stainless Steel SCH40, SCH80, SCH160
• 316 Stainless Steel SCH40

End Options:

• Hose Barb
• Pipe Thread Male NPT
• Coupling Female NPT
• Coupling Female Slip
• Flange 150 FF
• Cam Adapter
• Cam Coupler

 

For more liquid level system components, see: Monitoring Systems and Components

For more information, please call EPG Companies Inc.

 

Installation Hints:

• Pipe must be full for accurate reading.
• Minimum velocity is 1.5 ft./second. Recommended maximum velocity is 27 ft./second. The flow must be uniform at the point where the flow sensor is installed or an incorrect reading will result.
• To accommodate a uniform flow, allow at least ten (10) pipe diameters upstream and five (5) pipe diameters downstream of the flow sensor. Non-uniform flow is often caused by elbows, partially open valves or an increase in pipe diameter.