A Tale of Two Pumps


July 24, 2020

Over the years, EPG has designed and manufactured pump and controls systems to meet a wide variety of application demands from the most basic shroud-less pump squeezed into a small de-watering well pipe to monster submersible pumps moving hundreds of gallons per minute over hundreds of feet.

Let's take a look at two very different 2-stage SurePumps™.

This first, larger 2-stage pump & control panel, is part of a multi-cell landfill leachate management system. It's paired with a custom guide rail disconnect and complete accessories package including breakout junction boxes, flow meter and pressure gauge. The UL listed control panel accommodates two of these pumps in lead/lag alternating mode ensuring reliable performance and longevity.

VSDPT 95-2

  • Vertical Sump Drainer
  • Integrated Level Sensor
  • 2-Stage Pump End
  • 20HP 460V 3 Phase Motor
  • 150′ Lead Lengths
  • +450GPM @ 150′ TDH
  • Size 12 (12”) Sump Drainer
  • 86” Long, 400 lbs.
  • Custom 6″ Flanged Discharge

YCL950PT

  • Enclosure: 36”x36“ NEMA 4X SS
  • Operates: Two 20HP Pumps in Lead/Lag Alternating Mode
  • Voltage: 460V 3 Phase
  • Controller: OCS (Operator Control Station)
  • Features Include:
    • Elapsed Time Meters
    • Level Selector Switch
    • Sump High Level Alarm Light
    • Data Logging w/USB Port
    • Level Simulator
    • GFCI

 

 


This second and smaller 2-stage pump & control panel is very typical of the industry standard EPG has established for landfill side-slope riser applications. Like the system above, it also incorporates breakout junction boxes to help isolate expensive equipment from corrosive landfill gas and assist in maintenance.

 

WSDPT 2-2

  • Wheeled Sump Drainer
  • Integrated Level Sensor
  • 2-Stage Pump End
  • 1/2HP 230V 1 Phase Motor
  • 40′ Lead Lengths
  • 14GPM @ 40′ TDH
  • Size 4 (4”) Sump Drainer
  • 30” Long, 66 lbs.

L925PT

  • Enclosure: 24”x24“ NEMA 4
  • Operates: One 1/2HP Pump
  • Voltage: 230V 1 Phase
  • Controller: Level Master
  • Features Include:
    • Tank High Level Alarm
    • Level Simulator
    • GFCI

 

 


Both systems represent proven engineering design and reliability. Whatever demands your system dictates, there's an EPG Pump & Control to face them.

Contact EPG to discuss why SurePump™ pumps and PumpMaster™ controls should be your choice now and in the future. 1-800-443-7426 | info@epgco.com

 

Contact Us

EPG Companies Inc.
19900 County Rd. 81
Maple Grove MN, 55311
P: 763-424-2613
TF: 800-443-7426
F: 763-493-4812

Social

About Us

Since 1985, EPG Companies Inc. has designed and manufactured pollution control systems and equipment being used worldwide in various landfill, remediation, water and wastewater and industrial applications. With over 12,000 installations, EPG has become the choice among thousands of environmental professionals.

In addition to manufacturing superior, trouble-free equipment, EPG Companies conducts annual pumps and controls service school designed to help develop knowledge, expertise and troubleshooting ability. Our classes are applicable to all who are involved with the design, installation, and maintenance of Liquid or Gas Handling Systems, Remediation Systems and/or SCADA and Data Acquisition Systems.


Copyright © EPG Companies Inc. All rights reserved.