Liquid Level Sensor Float Switch

Inquire About This Product

The EPG Sensor Float Switch is used to accurately measure liquid levels and transmit signals to a pump controller.

The EPG Sensor Float Switch, perfect for confined areas, is designed to be used as a pilot duty, narrow angle liquid level sensing device. In high level applications, when tipped slightly above horizontal, the mecury within the housing slides over metal contacts sending a signal to the controller to activate the pump until the liquid levels fall. The sensor float switch is also available for low level applications and can be mounted to a discharge pipe or similar device or can be suspended from above.

  • Flexible, 16 gauge, 2 conductor cable (waterproof, chemical resistant, neoprene)
  • Small float switch housing, perfect in confined spaces
  • 2.81”dia. x 3.42” long (7.14 cm x 8.68 cm)
  • Not sensitive to rotation
    Can be used in most liquids up to 140° F (60° C)
  • Impact resistant, non-corrosive, PVC housing
  • Suitable to be used with intrinsically safe circuits

For more components, see:
Monitoring Systems and Components

EPG Sensor Float Switch, Float Switches
EPG Sensor Float Switch Brochure, Float Swiches, Landfill Equipment

For more information on liquid level float switches, please call EPG Companies Inc., your landfill equipment expert.

Welcome | About Us | Products | Newsletters | School | Contact | Search

Copyright © 2000-2013 EPG Companies Inc. All rights reserved.
19900 County Road 81 | Maple Grove, MN 55311